Smooth Touch has been designed to offer a greater amount of flexibility and operator feel when compared to our standard line of Cotton Fiber abrasive products.
We know Sigma Green is an aggressive grinding wheel, but we wanted to test to see just HOW aggressive. We had a piece of 304 stainless steel lying around, so we put 30 seconds on the clock and handed Jon Blake, our Products Manager, a right angle grinder.
To obtain smooth finished edges on cast or machined parts without altering the part geometry, a cotton-fiber based mounted point will do the trick.
This short video demonstrates a time saving technique for dulling edges on sheet metal. There are numerous ways to remove sharp edges, but we find this way the easiest because it dulls the edge in one run instead of breaking the edge on the top and then bottom of the sheet metal separately.
This video explains how to bring a welded stainless steel tube to a polish finish in just three steps. This process is ideal for handrails or tubing.
This video explains how to bring a welded stainless steel tube to a polish finish in just three steps. This process is ideal for handrails or tubing.
https://www.rexcut.com/blog/maxflex-aluminum
Smooth Touch has been designed to offer a greater amount of flexibility and operator feel when compared to our standard line of Cotton Fiber abrasive products.
Safety is top priority when using abrasives. Here is a short video on how to keep safe while grinding.
Rusty Covert, Rex-Cut Representative based out of Texas, recently visited the factory. While he was in town, Rusty Demonstrated ways he often sees Rex-Cut Type 1 Wheels being used, shaped to match pipe thread grooves.
This 30 second video sums up what Cotton Fiber Abrasives are and how they are made. Knowing a bit more about this abrasive line and how it saves finishing steps, can help you decide if it is right for your application.
Sigma Z, Rex-Cut's new fast grinding wheel, is now available and we want to show you how well it works. Tim Borges ran a 4-1/2 Sigma Z wheel on carbon steel for 2 minutes. The results are impressive.
Rex-Cut's Cotton Fiber Mounted Points are engineered for blending, deburring, and finishing machined and cast parts.
Sigma Z, which blends rapid stock removal and operator control, is engineered for improved productivity.
The Aluminator Cut-Off Wheel is designed to cut aluminum fast and cool without loading.
Rex-Cut Type 27 Max Flex blends and finishes flat and contoured surfaces in one step. Providing a wide surface contact area for optimum blending control and a uniform finish, these abrasive discs can grind, blend, and finish light welds in one step or blend and finish scratches after aggressive grinding applications.
Rex-Cut Type 1 Laser Braze Finishing Wheels have been engineered to finish brazing in roof joints for automotive assembly. These Type 1 Cotton Fiber Wheel are manufactured with the tolerances car manufacturers need in this specific application.
The new Aluminator grinds 2.2 times more aluminum weld per minute compared to the original version and as for life, this revised formula outlasts the original wheel by 46%.
Rex-Cut Cotton Fiber Quick Change Discs debur edges, grind small welds, and blend machine tool marks with extended life. The proprietary cotton fiber abrasive material provides long product life and consistent metal removal rate.
Sigma Green Max is for heavy stock removal on stainless steel, mild steel, hard face, titanium, and nickel alloys. It grinds noticeably quiet and smooth, reducing operator fatigue and leaving a quality finish.
