Rex-Cut Blog

    New & Improved: Aluminator Grinding Wheel

    Your next order of Aluminator Grinding Wheels will now grind faster and last longer than the original version.

    The new Aluminator grinds 2.2 times more aluminum weld per minute compared to the original version and as for life, this revised formula outlasts the original wheel by 46%.

    aluminator grinding wheel for aluminumThe Aluminator Grinding Wheel was invented to grind and blend aluminum without clogging or loading. This cotton fiber wheel naturally breaks down as heat is generated, resulting in constant sharp grit being exposed to the aluminum work piece, eliminating loading and the need for wax or grinding aids. This new Type 27 wheel offers increased grinding action, smooth operator control, very low vibration, with a RA finish of 200.

    “In addition to the non-loading properties, the unique construction provides a very consistent cut rate for the entire life of the wheel,” states Jon Blake, R&D Manager. “Unlike other grinding wheels geared for aluminum, the entire working section of this wheel can be used without sacrificing cut rate or finish.”

    We are manufacturing the Aluminator in the original thickness and now a ¼” thick version for additional life.

    Aluminator Grinding Wheels are available in:

    Size Spec Part Number
    4-1/2" x 7/8" A36 770000
    4-1/2" x 5/8-11 A36 771000
    5" x 7/8" A36 770002
    5" x 5/8-11 A36 771002
    6 x 7/8" A36 770003
    6 x 5/8 - 11 A36 771003
    7" x 7/8" A36 770004
    7" x 5/8-11 A36 771004
    4-1/2" x 1/4" x 7/8" A36 772000
    4-1/2" x 1/4"x 5/8-11 A36 772100
    5" x 1/4"x 7/8" A36 772001
    5" x 1/4"x 5/8-11 A36 772101
    6" x 1/4"x 7/8" A36 772002
    6" x 1/4"x 5/8 - 11 A36 772102
    7" x 1/4"x 7/8" A36 772003
    7" x 1/4"x 5/8-11 A36 772103


    For questions or more information, please fill out the form below and we will answer you as soon as possible.

    Filed under: Aluminum, Fabrication