Type 1 Deburring and Finishing Wheels

Type 1 Deburring and Finishing Wheels

Request a Quote

For deburring and finishing of stainless steel and aluminum and other ferrous and non-ferrous applications.

PRODUCT FEATURES

• Grind, debur and finish in one operation
• Smooth control with no chatter
• Remove burrs without changing part geometry
• Long life vs. non woven synthetic fiber wheels
• Maintain part geometry
• No smearing or back transfer on stainless steel and exotic alloys

PRIMARY APPLICATIONS

Automotive
Champher, debur and finish transmission gears

Aircraft/Aerospace
Champher, debur and finish engine components

Tool & Die
Finish, debur, maintenance of dies and molds

Fabrication
Corner blending, edge breaking, I.D. and O.D. debur and blend

Oil Feild Repair/Maintenance
Pipe thread maintenance and repair

STANDARD SPECIFICATIONS

Grain Type
"A" Aluminum Oxide
"C" Silicon Carbide

Grain Size
Course: 16, 24, 36
Medium: 54, 80
Fine: 120, 180
Very Fine: 320*

Grades/Bonds
Soft: GFX - for light deburring and blending
Medium: JTX - for light deburring with longer life
Hard: MTX - for light to medium stock removal

*Available only in aluminum oxide.

Diameter x Width x ID (inch)	Diameter x Width x ID (mm)	Maximum Safe RPM (TX bond)	Maximum Safe RPM (FX bond)
1 x 1/32 x 1/8	25 x .8 x 3	54,240	NA*
1 x 1/16 x 1/8	25 x 1.6 x 3	54,240	36,290
1 x 1/8 x 1/8	25 x 3 x 3	54,240	36,290
1 x 1/4 x 1/8	25 x 6 x 3	54,240	36,290
1 x 3/8 x 1/8	25 x 10 x 3	54,240	36,290
1-1/2 x 1/16 x 1/8	38 x 1.6 x 3	36,160	24,195
1-1/2 x 1/8 x 1/8	38 x 3 x 3	36,160	24,195
1-1/2 x 1/4 x 1/4	38 x 6 x 6	36,160	24,195
1-1/2 x 3/8 x 1/4	38 x 10 x 6	36,160	24,195
2 x 1/32 x 1/4	50 x .8 x 6	27,120	NA*
2 x 1/16 x 1/4	50 x 1.6 x 6	27,120	18,145
2 x 1/8 x 1/4	50 x 3 x 6	27,120	18,145
2 x 1/8 x 3/8	50 x 3 x 10	27,120	18,145
2 x 1/4 x 1/4	50 x 6 x 6	27,120	18,145
2 x 1/4 x 3/8	50 x 6 x 10	27,120	18,145
2 x 3/8 x 1/4	50 x 10 x 6	27,120	18,145
2 x 3/8 x 3/8	50 x 10 x 10	27,120	18,145
2 x 1/2 x 3/8	50 x 13 x 10	27,120	18,145
2-1/2 x 1/16 x 1/4	65 x 1.6 x 6	21,695	14,515
2-1/2 x 1/8 x 1/4	65 x 3 x 6	21,695	14,515
2-1/2 x 1/4 x 1/4	65 x 6 x 6	21,695	14,515
3 x 1/16 1/4	75 x 1.6 x 6	18,080	12,095
3 x 1/16 3/8	75 x 1.6 x 10	18,080	12,095
3 x 1/8 1/4	75 x 3 x 6	18,080	12,095
3 x 3/16 1/4	75 x 5 x 6	18,080	12,095
3 x 3/16 3/8	75 x 5 x 10	18,080	12,095
3 x 1/4 1/4	75 x 6 x 6	18,080	12,095
3 x 1/4 3/8	75 x 6 x 10	18,080	12,095
3 x 3/8 3/8	75 x 10 x 10	18,080	12,095
3 x 1/2 3/8	75 x 13 x 10	18,080	12,095
3 x 1 x 1/2	75 x 25 x 13	18,080	12,095
4 x 1/16 x 1/4	100 x 1.6 x 6	13,560	9,075
4 x 1/16 x 3/8	100 x 1.6 x 10	13,560	9,075
4 x 1/8 x 1/4	100 x 3 x 6	13,560	9,075
4 x 1/8x 3/8	100 x 3 x 10	13,560	9,075
4 x 1/4 x 1/4	100 x 6 x 6	13,560	9,075
4 x 1/4 x 3/8	100 x 6 x 10	13,560	9,075
4 x 3/8 x 3/8	100 x 10 x 10	13,560	9,075
4 x 1/2 x 1/2	100 x 13 x 13	13,560	9,075
4 x 3/4 x 1/2	100 x 19 x 13	9,075	9,075
4 x 3/4 x 1/2	100 x 25 x 13	9,075	9,075

*Not available in FX bond.