Carbide Bur SJ - Countersink 60 Degree

Technical Information:

All burs are manufactured using grade K20 micrograin carbide and high speed heat treated steel shanks. All brazed burs are 100% torque tested for the safest operation.

Maximum Recommended Operating Speeds

(A) For stainless steel, nickel, and other hard alloys
(B) For aluminum, copper, bronze, plastic, and other soft metals
*Max RPM for burs with extended shanks (ie; 6" shanks)

Standard Cut:

• general purpose
• deburring, weld prep, metal removal
• nickel alloys, steels, copper and cast iron

Double Cut:

• finer finish, smaller chips
• smoother operator control, less vibration
• improved cutting action
• stainless steel, high nickel alloys,cast iron

Double Cut with 6 Inch Shanks

   End cut burs have a skip flute design for improved cutting action.

Non-Ferrous Cut:

• finer finish, smaller chips
• smoother operator control, less vibration
• improved cutting action
• stainless steel, high nickel alloys,cast iron

General Information for Bur Use:

• It may be necessary to adjust the bur speed as shown under maximum recommended operating speeds for optimum performance.
• Use slower speeds for harder materials.
• Use faster speeds when using small burs.
• Apply constant pressure and movement when in use.
• Running burs below recommended speeds may cause chipping.
• Do not use worn out tools and collets as they will also cause chipping.
• Running burs too fast will cause teeth to wear prematurely.